Bundle of Red Lion RJS-100-PREM 1 HP, 23 GPM, 115/230 Volt, Premium Cast Iron Shallow Well Jet Pump, Red, 602208 and 30-50 PSI M4 Low Pressure Pump Protection Cut-Off Switch, 640134

The Red Lion RJS-100-PREM clean water pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have suction lifts down to 25 feet. Its rugged cast-iron construction is designed for years of service and reliability. Includes a factory pre-set 30/50 pressure switch and pressure gauge. 115/230 Volt motor is factory set for 230 Volts but can easily be changed to 115-Volts - follow the instructions in the owner's manual. Please ensure the voltage on the pump matches the power source voltage otherwise the pump will not operate at full power. This bundle also comes with the Low Pressure Cut-of Switch (Part # 640134). The Red Lion 640134 Low Pressure Cut-off Switch is designed to protect your pump from running dry. If the water level in the well runs too low, the pressure will drop, this switch detects a drop in the water pressure and turns the pump off when the pressure falls by approximately 10 PSI. Running a pump dry can severely damage a pump, melting the impeller, which prevents the impeller from turning. This can cause the motor to burn out. Protect your investment! Allow your well time to recover. To reset the pump, prime the pump and hold the lever down manually until the pump kicks in. This switch is equipped with 1/4-inch female NPT threading at the bottom of the unit and attaches easily to the pump or the piping.

• SHALLOW WELL JET PUMP: Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-1/4” FNPT suction intake and 1” FNPT outlet discharge; 1 HP pump can draw up to 23 gallons per minute
• COMES WITH M4 TYPE LOW PRESSURE CUT-OFF SWITCH: running a pump without water can severely damage a pump; this switch automatically shuts pump off when pressure decreases 10 PSI which prevents the pump from running dry
• BUILT TO LAST: Rugged cast iron casing and volute for long life and high-efficiency; glass-filled thermoplastic impeller and diffuser for durability
• HEAVY DUTY MOTOR: runs on either 115 or 230 volts; voltage must be selected to match incoming power source; Includes a capacitor for increased starting power; CSA listed in USA and Canada
• SPECIFICATIONS: 1 HP, 17.6 Amps at 115 Volts; 8.8 Amps at 230 Volts; 1-1/4-inch FNPT intake; 1-inch FNPT discharge; Max Pressure = 65 PSI; Max Head = 150 Ft.